blog
Skip to main content
Your Cart is Empty
Your Cart is Empty

Rx Pad

Improving the Health of Your Clinical Practice
Nov
28

Part 3: Personnel & Management as Contributing Factors in Hyperbaric Facility Accidents (continued)

Hyperbaric-Facility-Safety-4 Hyperbaric Facility Safety Design Factors: Facility and Equipment

In this third and final installment of How Accidents Happen we continue looking at personnel & management as contributing factors in hyperbaric facility accidents. 

Continue reading
  691 Hits
Oct
31

Part 2.1: Personnel & Management as Contributing Factors in Hyperbaric Facility Accidents

Hyperbaric-Facility-Safety Part 2.1: Personal & Management as contributing factors in hyperbaric facility accidents

When one commences a task to reconstruct how an accident happened, personnel and management factors are often “at the head of the class.” Some of the more commonly occurring factors are discussed in this section. It should be noted, however, that this list is not all-inclusive. The factors that can contribute to accidents are many and varied. As technology and operations become ever more complex, our ability to create new ways to “do ourselves in” are amazing.

Continue reading
  519 Hits
Oct
25

Contributing Factors in Hyperbaric Facility Accidents

Contributing Factors in Hyperbaric Facility Accidents

For some accidents there is a clear “smoking gun.” However, most accidents are caused by a combination of factors, each of which contributes in some manner. Often these factors accumulate over some period of time preceding the accident. This chapter addresses the factors that foster conditions under which accidents are more likely to happen and discusses some of the steps to be taken to avoid them. Also included is a case history illustrating several of the factors.

Continue reading
  744 Hits
May
16

Analyzing Risks: Hyperbaric Emergency Procedures

Analyzing Risks: Hyperbaric Emergency Procedures

Analysis of hyperbaric facility risks is a difficult process. It begins with identifying the hazards in a hyperbaric facility. These hazards could be from a variety of sources: equipment related (e.g. loss of power, loss of gas supply, control system malfunction); operational (e.g. untrained or unprepared staff); medical (e.g. pressure injuries, medical complica- tions); and environmental (e.g. contaminants, external disaster). The actual risks associated with a hazard depend on the probability, frequency, and severity of the potential losses.

Continue reading
  533 Hits
May
02

Hyperbaric Emergency Procedures

Hyperbaric-Emergency-Procedures

Hyperbaric emergency procedures usually address a variety of problems ranging from mechanical malfunction to medical complications—important events that do not seem to share a common trait but cover a wide range of situations. Such a variable group of events must be discussed in a broad context. This chapter will discuss emergency pro- cedures within the framework of the entire hyperbaric safety program. In this broader context, events that may or may not be emergencies belong together. That is why this dis- cussion will replace the term “emergency procedure” with the term “contingency plan.”

Continue reading
  1178 Hits
Mar
16

The Fire Triangle and the Special Role of Oxygen

The Fire Triangle and the Special Role of Oxygen

In general, fire prevention is described in terms of the Fire Triangle model. For a fire to occur, a fuel, an oxidizer, and an ignition source must be present. Fire prevention in a hyperbaric chamber must account for an increase in the oxygen component of the atmosphere in terms of both oxygen fraction and partial pressure. The resultant increase in oxygen renders what might be inactive fuels and ignition sources in a “normal” air environment active, which increases the risk of a fire.

Continue reading
  1217 Hits
Mar
07

Hyperbaric Chamber Safety Systems

Hyperbaric Chamber Safety Systems

Safety in a hyperbaric chamber begins with design and specifications that are incorporated in construction codes such as the ASME Boiler and Pressure Vessel Code. ASME and related codes establish minimum standards for materials utilized in the construction of a chamber and how those materials are fabricated.2 Subcodes address specific requirements for pressure vessels intended for human occupancy and the viewports utilized in the chamber.3 ASME codes focus on maintenance of the structural integrity of the chamber during routine operations as well as providing safety components such as pressure relief valves to reduce the potential for catastrophic failure of the chamber in the event of overpressure resulting from fire or other mishap. A chamber will undergo inspection, testing, and be stamped to indicate that it has been manufactured in compliance with the applicable pressure vessel code. In many locales, only stamped pressure vessels are allowed to be utilized.

Continue reading
  578 Hits
Feb
28

Hyperbaric Safety Tip: How Accidents Happen

_20230228-214043_1

For some accidents there is a clear “smoking gun.” However, most accidents are caused by a combination of factors, each of which contributes in some manner. Often these factors accumulate over some period of time preceding the accident. This chapter addresses the factors that foster conditions under which accidents are more likely to happen and discusses some of the steps to be taken to avoid them. Also included is a case history illustrating several of the factors.

Continue reading
  1150 Hits
May
28

2 Aspects that Influence Hyperbaric Safety

2 Aspects That Influence Hyperbaric Safety Learn Hyperbaric Facility Safety

There are two distinct aspects to the field of hyperbaric medicine that influence safety: 

Continue reading
  2279 Hits
Mar
03

[Free Webinar] Introduction to the Role of Hyperbaric Safety Director

[Free Webinar] Introduction to the Role of Hyperbaric Safety Director

 

Continue reading
  7212 Hits

Copyright

© 2016 Wound Care Education Partners. All Rights Reserved.

Feb
22

The Path to Become a Certified Hyperbaric Technologist (CHT)

We receive a number of phone calls each week from folks inquiring how to become a Certified Hyperbaric Technologist (CHT).  The added qualification of CHT is administrated by the National Board of Diving and Hyperbaric Medical Technology (NBDHMT).

Continue reading
  59691 Hits

Copyright

© 2016 Wound Care Education Partners. All Rights Reserved.

Jul
01

Air Breaks During Hyperbaric Treatment by Darren Mazza, EMT, CHT

Air Breaks During Hyperbaric Treatment by Darren Mazza, EMT, CHT

When treating patients with hyperbaric therapy in the monoplace chamber using 100% oxygen, the supervising hyperbaric physician may order air breaks to be provided to the patient at certain intervals during the treatment.

Continue reading
  14307 Hits

Copyright

© 2016 Wound Care Education Partners. All Rights Reserved.

Jun
25

Liquid Oxygen: Hyperbaric Oxygen Breathing Gas Systems

Liquid Oxygen: Hyperbaric Oxygen Breathing Gas Systems

This article will provide you with some background on liquid oxygen, which is the most common form of bulk storage for this gas. The manufacture, storage, basic design of a liquid oxygen converter, and general safety practices will be covered. Again, keep in mind that working around oxygen has its hazards, but working around a liquid oxygen system can be outright deadly if you have not been properly trained.

Continue reading
  13303 Hits

Copyright

© 2016 Wound Care Education Partners. All Rights Reserved.

May
13

Question: Does a Safety Director Course designate someone as a Hyperbaric Safety Director?

We are often asked the question, "Does participation in a safety director course automatically designate me as a hyperbaric safety director?" There seems to be some midunderstanding around this issue.

Continue reading
  7681 Hits

Copyright

© 2016 Wound Care Education Partners. All Rights Reserved.

Mar
18

Question: Why is a hyperbaric facility maintenance program necessary?

Question: Why is a hyperbaric facility maintenance program necessary?

The development of a comprehensive maintenance program for a hyperbaric system and its supporting equipment is essential for a safe and cost-effective operation. The chamber and its operational systems, the chamber room, and the equipment used in and around the chamber should be maintained at the highest operational level. This should also include the cleanliness of all elements of the interior and exterior systems.

Continue reading
  8650 Hits

Copyright

© 2016 Wound Care Education Partners. All Rights Reserved.